Features
- Polyamide
thermal break for superior insulation
- Security
locking on main doors and intermediate
stiles
- Maximum
sash weight up to 85kgs
- High
performance weathering
- Internally
beaded
- Virtually
Maintenance free
Options
- Opening
inside or outside of building
- Accommodates
glazing from 6mm to 38mm units and panels
- Choice
between standard sill or low sill profile
allowing leveling of frame with floor
- Accommodates
many styles and opening options
- Single
or dual colour finishes
- Slides
left or right in opening
Materials
Aluminium: AIMgSi 0.5 Type 6060.6063 T5 in condition F22
(according to NBN P21-001 and DIN 7863, TV110, NFP 85301,
ISO 3994. Tested and approved according to an artificial
ageing test of "Plexi glass" combined with
vulcanised rubber.
Co-extruded
profiles: According to DIN 7863, TV 110,
BFP 85301, ISO 3994, tested and approved
according to an artificial ageing test of "Plexi
glass" combined with vulcanised rubber.
Thermal
break: Polyamide strips PA 6.6.25% reinforced
with glass fibre.
Finishing
Electrostatic powder coating: According to the guidelines
of APA Qualicoat in most of the current RAL colours.
The composed profiles (with thermal break) can be coated
with different inner and outer colours (dual colours).
Anodisation in satin or bronze colours with EWAA/EURAS
Qualinod quality label. Also Available in woodstructure
finish to imitate different woodstructures (powder coated
according to Qualicoat standards).
Thermal
Break
The profiles consist of 2 aluminium extrusions which are
separated from one another by polyamide strips PA 6.6.25
reinforced with glass fibre. A gluing thread, rolled and
pushed in together with the thermal break profile ensures
a strong adhesion after melting and flowing, when the profiles
are heated in the hardening furnace.
Performance
| According
To STS 52.0 |
|
|
| Mechanical
resistance to wind |
PV2 |
|
|
|
|
Details
Built-in depth: Outer
frame 78mm, sash 70mm.
Sealings:
With extruded EPDM rubber and PP brushes
Glazing:
From 6 to 38mm.
Design,
Manufacture & Installation
Utopia Windows undertake all aspects of folding door design,
manufacture, installation and support. With years of experience
in the installation of folding doors we understand that accuracy
is everything, and as such we do not sell our doors to contractors
for installation, rather, every door we manufacture, we install.
This way we know that the door is installed correctly. There
are alot of things that can go wrong when installing bi-folding
doors including .
|
